Fitting Guide

Fitting Instructions for Part No 1026

  • Check orientation of Secureaplate (note offset of the mounting holes)
  • Attach Secureaplate using large screws supplied
  • Remove orange backing from double sided tape
  • Align registration plate and apply to double sided tape
  • Install the 2 small screws with nylon washers under the screw heads to secure the registration plate to Secureaplate

Fitting Instructions for Part No 1030

  • Align and apply Secureaplate to vehicle with screws supplied (note offset of the mounting holes)
  • Remove backing from double sided tape from front of Secureaplate
  • Align registration plate and apply to double sided tape
  • Install the 2 small screws with nylon washers under the screw heads to secure the registration plate to Secureaplate

Caution

Do not push too hard on small screws as contact with the body of the vehicle may occur.